OSB(Oriented Strand Board, literally translated as OSB) in Russia, North Americ and Europe, OSB is widely considered to be developing fast the most mature technology vitality boards. As the demand of OSB boards increasing so quickly, so our company followed the global market changing and demanding, integrating all strength of engineers and staff, designed and developed this full automatic OSB production line.
1.Chip preparation section:
Raw material is reduced into qualified chips by the drum chipper, then the chips are transported to the chip bin, and then feed to the knifering flaker by which the chips are turned to flakes, then the flake stored in wet flake silo.
2.Drying and sifting section:
The flakes are discharged from the wet flake bin which are conveyed to the rotary dryer. Qualified core flakes are stored in core flake bin; oversize flakes are send to mill to be re-crushing, and transported to surface dry wood shavings bin to be stored.
After scaled,the core and surface flakes are to be effectively and uniformly mixed with qualified glue to achieve the uniform mixing and the sufficient sizing effect.
4.Paving and thermoforming section:
The after sizing shavings are transported to the mechanical grading paving machines by the belt conveyor. and they are paved to the uniform flat slab. After a series of processes such as pre-press,length wise saw, cross saw, accelerate conveyor, storing conveyor and loading conveyor,
the rough boards are sent to the installed hoistingcages, then the rough boards are pressed by the hot press machine.
The thermofoming boards are conveyed to the panel turnover machien to become cool,then the boads are transported to the vertical and horizontal edge cuttingmachine by the coolingconveyor.
The boards are sanded, checked and stored . PLC control is used in mat-forming section. We can provide 5000-100000 m³ OSB production line as well as a single machine supplement such as chipper, refiner,dryer,forming machine,pre-press, hot press etc.
7. PLC control system:
Full automatic control, SIEMENS control system.
8. Heating energy center:
Heating energy center is the heating supply system from our company design, manufacture for the wood based panel industry, it’s fuel can be the waste wood, wood skin, saw dust, sanding power and so on, produce multiple heat carrier like the high temperature thermal oil, steam, hot air and some other high effeciency, energy conservation, environmental protection heating energy supply equipment.