Particle Board Making Machine

Home >> Products >> Particle Board Making Machine

  • Particle board machine woodworking machine

  • Particle board machine woodworking machine

  • Particle board machine woodworking machine

  • Particle board machine woodworking machine

Particle board machine woodworking machine

Particle board is made from small-diameter wood, branches, wood residuse and non-wood agricultural residuse via chips preparation, drying, forming and hot press section. Finished board can used for furniture, building, packing, vehicle and ship decoration and lamination.


1. chips preparation section

Raw material is reduced into qualified chips by the drum chipper, then the chips are transported to the chip bin for transitional storage, and then feed to the knife-ring flaker by which the chips are turned to flakes, then flakes, then the flakes are stored in wet flake bin.

Particle board machine Particle board machine

2.Drying&sifting section

The flakes from the wet flake bin are conveyed to the dryer. Qualified core flakes after sifting are stored in core flake bin; oversize flakes are conveyed to miller for milling, and stored in surface flakes bin.

Particle board machine Particle board machine

3.Glue regulating & Applying section

After scaled, the core and surface flakes are to be effectively and uniformly mixed with required glue independently in their glue mixer respectively.

 Particle board machine Particle board machine

4.Forming & Hot-pressing section

The surface and core flakes are snet into classi-forming machine, and forming on the conveyor uniformly. After processes of metal remover, pre-press, lengthwise saw, cross saw, accelerate conveyor, scaling conveyor, storing conveyor and loading conveyor, mats are transported to carrier and then to hot press. Rough board after pressing are pushed to unloader via pallet.

Particle board machine Particle board machine

5.Cooling & Sizing section

The rough board is conveyed to star-cooler for cooling, then the rough board goes through siae trimming saw and become a qualified particle-board, stacked on the hydraulic lift.

 Particle board machine Particle board machine

6.Sanding section

The board are sanded, checked and stored. PLC control is used in mat-forming section.

Particle board machine Particle board machine

7. PLC control system

Full automatic control, SIEMENS control system.

Particle board machine

8. Heating energy center

Heating energy center is the heating supply system from our company design, manufacture for the wood based panel industry, it’s fuel can be the waste wood, wood skin, saw dust, sanding power and so on, produce multiple heat carrier like the high temperature thermal oil, steam, hot air and some other high effeciency, energy conservation, environmental protection heating energy supply equipment.

Particle board machine Particle board machine


Contact us

Whatsapp : +86 17854956795

Wechat : +86 17854956795

Email : Kevin@geelonggroup.com