Plywood Making Machine

Home >> Products >> Plywood Making Machine

  • Veneer Peeling Machine

  • Veneer Peeling Machine

  • Veneer Peeling Machine

  • Veneer Peeling Machine

Veneer Peeling Machine

Plywood Veneer peeling machine is the first step for the plywood production line, it will rotary cut the woodlog into veneer with different thickness according to you need, and then put the veneer on the dryer machine, the veneer accurate thickness is very improtant for your plywood quality, so we try our best to make the veneer peeling have high accurate and good porformance. We have improved base on the original machine.

Model NO.
GLUVP4GLNDP4GLHDP4
Max.Wood loglength1300mm1300mm1300mm
Max.Wood dimeter500mm500mm550mm
Blade length1500mm1500mm1500mm
Thickness of veneer peeling0.8-4.0mm0.8-6.0mm0.8-4.0mm
Linear speed of host machine46m/min35-80m/min60-120m/min
Double roller diameter120mm120mm120mm
Single roller diameter120mm120mm120mm
Double roller motor power11kW7.5kW*2PCS7.5kW*2PCS
Single roller motor power5.5kW*2PCS5.5kW*2PCS5.5kW*2PCS
Cutting knife motor power1.5kW2.2kW ( servo motor)2.2kW ( servo motor)
Rubber roller motor power1.5kW1.5kW2.2kW
Feeding motor power7.5kW ( servo motor)7.5kW ( servo motor)11kW ( servo motor)
Veneer conveyor motor power1.5kW1.5kW1.5kW
Total power34kW38.7kW40.7kW
Total weight5500kg5800kg6200kg
Machine dimension4500*1600*1380mm4500*1900*1450mm4500*1900*1450mm


Veneer Peeling Machine

1.  As we all know the veneer thickness will decide the board quality and cost, so to produce the uniform thickness veneer is necessary for veneer production factory, In order to solve this problem we improve our machine technology and use the good quality 11kw servo motor, the motor can be control easily and accurate, when the control syetem sends a pulse, the servo motor will rotary by an angle,( the angle is very samll, it can divide a circle into 6400 angles ), so the accurate is very high, and the veneer thickness will be good. in addition, we also add the automatic knife adjustment system, it can change the knife-to-single roller distance according to the wood diameter, in the different dimeter will change different knife-to-single roller distance, the system will cantrol the veneer thickness easily. The above two technologies will make our rotary cutters produce better quality veneer.


Veneer Peeling Machine

2. The machine uses mining equipment's feeding lead screw, which is made by Taiwan technology, the feeding lead screw is made by special steel, the screw nut is made by copper. It has very high feeding accuracy and guarantee accurate veneer thickness. The standard feeding screw diameter is 70mm. Diameter can be 100mm according to client’s requirement. Now some factory use the double pitch screw, but i must tell cilent the trueth, yes, the double pitch screw is strong than the single but you have to sacrifice some precision, the double screw mean it has two cycle screw thread, so when the reducer rotate around the double screw will go ahead double distance than the single screw. and since of the advantages of servo motor subdivision, the double pitch screw will be widely used with good accurate.

 

Veneer Peeling Machine

3. All peeling roller of Geelong veneer peeling machine are quenched and plating process, the rigidity is better, we can choose the right roller patterns to meet your different wood species according to different kinds of veneer and wood.


Veneer Peeling Machine

4. All Geelong veneer peeling machine uses advanced Single chip microcomputer control system , that can improve the rotary cutting accurate, the other electric parts we uses France Schneider brand, operation easily and long using life.